United States
Select country
  • Europe
  • North America
  • South America
  • Asia / Pacific
  • Middle East / Africa

FAQ

Questions and answers

FAQs - Questions and answers

The documents in this section provide answers to the most frequently asked questions about products and applications.

The documents are divided by product type: Safety light curtains,Safety Controller, Accessories and topic covered. Then, each topic lists the most frequently asked questions.

Here are the topics covered:

 

 

 

 

 

 

 

 

 

 

 

Safety light curtains LED meaning

Safety light curtains LED meaning

The instructions given by the LEDs on the projector on the receiver and on the control unit allows in most cases to identify the cause of an incorrect operation of the system.

What is the meaning of the LEDs on EOS4 Family safety light curtains?

  • EOS4 Safety light curtains -  LED Meaning  (Ita, Eng, Fra, Spa, Ted)

What is the meaning of the LEDs on ADMIRAL Family safety light curtains?

What is the meaning of the LEDs on JANUS Family safety light curtains?

What is the meaning of the LEDs on EOS2 Family safety light curtains?

What is the meaning of the LEDs on VISION Family safety light curtains?

 safety light curtain not working

The safety light curtainis not working properly

What to do when the light curtain does not work and the meaning of the LEDs does not allow to identify the fault?

In any case we recommend a system crash, sending the test command to verify that the cause of the abnormal behavior is not attributable to any electromagnetic interference of random character.
In the case of operating irregularities that there even after sending the test command and, later, after shutting down and restarting the system:

  • check the integrity and fairness of the electrical connections;-check that the power supply voltage levels conform to those indicated in the technical data;
  • check that any relay or external contactors are used correctly and with adequate suppression modules indicated by the manufacturer;
  • check that the projector and receiver are correctly aligned and that the optics are clean;
  • check the working distance (vapors or fumes may cause occasional occupations for use at maximum flow rate);
  • check that the barrier is not subjected to vibrations (momentary loss of alignment);
  • check that there are no two or more users who work near or alongside and a receiver cannot "see other projectors" in addition to its own;
  • check that the barrier is not placed near reflective surfaces (e.g. transparencies or sheet metal panels);
  • Verify that all elements of the system have a good grounding;

If the suggested controls are not sufficient to restore the proper functioning of the system, send the appliance to our laboratories, complete with all its parts, indicating with clarity:

  • serial number;-date of purchase;
  • period of operation;
  • type of installation;
  • fault detected.
 Placement of the acces control

Placement of the acces control light curtains in the paletizer plant

MOSAIC safety controller

MOSAIC safety controller LED meaning

What is the meaning of the LEDs on Mosaic Safety controller modules?

The instructions given by the LEDs on the Mosiac modules allows in most cases to identify the cause of an incorrect operation of the system.

  • Mosaic safety modules - LED Meaning (Ita, Eng, Fra, Spa, Ted)

 

 

Interconnection modules

Janus Mjbox - Interconnection modules

How does the MJBOX work? What are the commands and how the MJBOX is connected to the safety light curtains? - MJBOX for Janus light curtains: functioning and connections (Ita - Eng).